OVEN PROBE THERMOMETER WITH ALARM

O*C... +230*C / 32*F.. + 450*F

 

Instant Readout of Inner Temperature of Food

Temperature Alert

Automatic High/Low Memory

Stainless Steel Probe and Cable

BIG DIGIT Display (48 X 21 mm)

Magnetic Bracket with Probe Holder, Velcro provided

Battery: 1 X AAA Mercury Free 1.5V (included)

 

1) Set the oven to the desired temperature.

 

2) Clean the stainless steel probe and insert it into the meat. ) Place the meat in the oven.

 

4) Set the'ALARM'as below.

 

At Back: *F/*C Selectable Switch

            Rotate casing forward to select or to replace battery

 

 

 

Set Alarm

 

Ft I L

 

 

 

Slept) Press to enter to' SET Alarm Mode

 

: * SET ALARM 0 appears on display

 

Step 3) To complete alert setting press to return to I" current temperature, ABET alarm ' disappears % on display

 

Note:

1.            Changing from 'F or *C will erase "SET ALARM' setting Reset as desired.

2          Change battery when display becomes dim Reset "SET ALARM' as

            Desired

 

IMPORTANT: DO NOT EXCEED THE PROBE AND CABLE TO TEMPERATURE ALLOWED. THE ELECTRONIC UNIT MUST REMAIN OUTSIDE THE OVEN. DO NOT USE THIS THERMOMETER IN A MICROWAVE OVEN. BEWARE OF THE HOT PROBE AND CABLE WHEN REMOVING.

 

OVEN TEMP            'c            min per lb         OVEN TEMP  min per lb

 

325'f / 17 7'c                           325'f / 1 77*c

BEEF-RARE            140160            20 - 35            HAM            140/60            15-20

BEEF-MED            160  11            25 - 4            PORK LOIN   160/71            30-40

BEEF-WELL            17C 77            --- 45            LAMB            160/71            30-40

 

MEAT LOAF            1. 6 5 74        4~52            POULTRY    180/82            25-35

 

--- Memory of highest & lowest recorded temp

Press - - for highest reading,

            " MAX " appears on display

Press again to return to current temperature,

            - MAX ' disappears on display

 

-Step 2) Press to desired alert temperature,

 

- -Press ' min " for lowest reading.

                        - MIN - appears on display

            Press again to return to current temperature,

                        " MIN " disappears on display

 

 

Step 4) When desired alert temperature is exceeded. Alarm sounds (minute duration). Press to stop alarm

 

Press to clear recorded highest & lowest reading new record taken thermometer record new memory automatically